![]() The needed files can be found on CD1 in the Progman package and Progman can be downloaded on thepiratebay. It’s bundled in a BMW Standard Tools package.įirst of all you need to import the data files needed to flash your ECU. Winkfp 5.3 or higher should be used to avoid the bugs in the earlier versions. If the part about directly supplying pin 18 with 12v sounds scary, then you can try without doing so – but you’ll probably get an error. ![]() It may not be necessary for all models, but it looks like it’s needed for cars with the Motronic 5.2 DME and MS42 DME. This is done to directly supply the DME(ECU) with +12v when you are flashing. Pin 14 and 18 needs to be connected if you are using a round 20-pin ADS converter. This is done to activate both of the K-bus lines used by the older cars. Pin 7+8 in the OBD-connector need to be bridged if you are going to program a BMW manufactured before 2002. Using Winkfp to program a DME with a different softwareįirst of all you need a K+DCAN cable.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |